The Live Production Center facilitates video and audio creation where a limited number of operators are available making one-person operation possible for remote camera shooting to streaming transmission.
Alison S. Istnick · April 4, 2018
Panasonic System Solutions Company of North America (PSSNA) has announced April availability of the AV-HLC100 Live Production Center that combines a 1 ME switcher, remote camera controller (up to eight cameras), graphics overlays, streaming/recording and audio mixer functions to enable easy live streaming with one-person operation.
The Live Production Center facilitates video and audio creation where a limited number of operators are available, such as university sports, webcasting, live streaming and live event video production. The Center makes one-person operation possible for remote camera shooting to streaming transmission. NDI, or Network Device Interface, a technology of NewTek Inc. is an advanced video over IP production workflow, allowing distribution of video across network infrastructure rather than specialized video hardware. The AV-HLC100 acts as a hybrid device, bridging baseband (SDI and HDMI) inputs and outputs, with NDI inputs and outputs allowing users to easily transition to the world of IP.
The HLC100 supports a wide range of both NTSC and PAL video formats* including 3G-SDI video in1080/59.94p and 1080/50p, and enables cross-conversation on inputs. Eight total inputs are available with the choice of SDI or HDMI for input 1, SDI for inputs 2-4, and NDI for input 5-8. Alternatively, one can utilize NDI for up to all eight inputs so that a system can be configured to match the production environment. There are two SDI outputs, with associated NDI outputs; Output 1 is the program output. Output 2 can be assigned to program, preview or to an AUX bus. The AUX bus is useful as an independent secondary output for clean recording or alternate feed.
The HLC100 Center works directly with Panasonic PTZ and systems cameras, discovering and deploying them automatically using IP video transport (although SDI may be used as well). It will work with all NDI and NDI|HX capable video sources. Compatible cameras include: the new AWHN38, AW-HN40, AW-UN70, and AW-HN130 integrated PTZs with NDI|HX, and the AW-HE38, AW-HE40, AW-UE70, AW-HE130 PTZ cameras with available upgrade to NDI|HX. Fully integrated support of NDI|HX, NDI High Efficiency Mode, allows for built-in support of NDI by Panasonic professional PTZ cameras, linking them directly to an NDI network, with automatic detection by the AV-HLC100 Live Production Center, as well as seamlessly integrating them with the hundreds of other NDI-capable products in the marketplace.
“With the HLC100, high-performance professional operation can be realized even in production environments with few operators, limited space and gear, and no expert staff,” said Delix Alex, Panasonic Corporation of North America Two Riverfront Plaza · Newark, NJ 07102 Tel: 201.348.7000 · www.panasonic.com Product Manager, PSSNA. “As part of Panasonic’s NDI family of products, the HLC100 contributes to an end-to-end IP workflow with single cable connectivity to NDI|HX-capable PTZ camera models, with ultra low latency video, power, audio/video and tally all over one cable. Users can significantly cut install and setup time and yet continue to deliver high quality production.” For remote camera operation, the HLC100’s connection and settings can be easily executed using the Easy IP connection function (fully automatic if the connection is to an NDI-enabled camera), and pan, tilt, zoom, and focus operations can be performed with one hand using the large joystick or two hands in combination with dedicated zoom lever and focus/iris knobs. Up to 100 camera presets can be executed from the hardware panel or on the user interface. Commonly accessed camera control functions such as white balance are available for quick access. For advanced settings, a quick short-cut to the camera web interface is provided, allowing access of almost any setting in a Panasonic PTZ camera.